BMW Swirl Flap Blanking Plates 22mm i6 Automotive

BMW
22MM SWIRL FLAP BLANKING PLATES I6 AUTOMOTIVE

More details

$8.95

Print
  • New
  • 100

Send to a friend

BMW Swirl Flap Blanking Plates 22mm i6 Automotive

BMW Swirl Flap Blanking Plates 22mm i6 Automotive

BMW
22MM SWIRL FLAP BLANKING PLATES I6 AUTOMOTIVE

Part No:
6003

Brand:
i6 AUTOMOTIVE


Problem:
The flaps are fully open during higher load conditions to maximise volumetric efficiency and power output. The swirl flaps are a poor design, they are prone to failure. When the swirl flap breaks, the debris falls into the engine, either sticking in the valve port and jamming it open, causing the piston to collide with the valve, or falls into the cylinder itself causing the piston and head to become damaged.


Symptoms:
There are no associated symptoms. If the swirl flaps have failed it then an engine rebuild will be required.


Fault Codes:
There are no associated fault codes with these symptoms.


Solution:
I6automotive has manufactured a cost effective solution. Blanking plugs that will replace swirl flaps and leave your engine running just as it was before.


Kit Contents:
X36 Swirl Flap Blanks

1 needed per cylinder


Fitment information for:
BMW

No customer comments for the moment.

Write a review

BMW Swirl Flap Blanking Plates 22mm i6 Automotive

BMW Swirl Flap Blanking Plates 22mm i6 Automotive

BMW
22MM SWIRL FLAP BLANKING PLATES I6 AUTOMOTIVE