Set of 6 22mm OEM BMW Swirl Flap Blanking Plates i6 Automotive INC seals

BMW 
SET OF 6 22MM OEM SWIRL FLAP BLANKING PLATES I6 AUTOMOTIVE INC SEALS

More details

$28.95

Print
  • ukar_1994
  • New
  • 100

Send to a friend

Set of 6 22mm OEM BMW Swirl Flap Blanking Plates i6 Automotive INC seals

Set of 6 22mm OEM BMW Swirl Flap Blanking Plates i6 Automotive INC seals

BMW 
SET OF 6 22MM OEM SWIRL FLAP BLANKING PLATES I6 AUTOMOTIVE INC SEALS

Part No:
7002

Brand:
i6 AUTOMOTIVE

Problem:

The flaps are fully open during higher load conditions to maximise volumetric efficiency and power output.

The swirl flaps are a poor design, they are prone to failure.

When the swirl flap breaks, the debris falls into the engine, either sticking in the valve port and jamming it open, causing the piston to collide with the valve, or falls into the cylinder itself causing the piston and head to become damaged.

For BMWs pre 2003 53 the swirl flaps will be a 22mm size. For BMWs after 2003 53 you will need to remove the manifold and check the size of the swirl flaps. You can also purchase both sizes and return the unused set under our 1 year no quibbles return guarantee.

Symptoms:

There are no associated symptoms. If the swirl flaps have failed it then an engine rebuild will be required.

Fault Codes:

There are no associated fault codes with these symptoms.

Solution:

I6automotive has manufactured a cost effective solution. Blanking plugs that will replace swirl flaps and leave your engine running just as it was before.

Kit Contents:

X4 Swirl Flap Blanks

No customer comments for the moment.

Write a review

Set of 6 22mm OEM BMW Swirl Flap Blanking Plates i6 Automotive INC seals

Set of 6 22mm OEM BMW Swirl Flap Blanking Plates i6 Automotive INC seals

BMW 
SET OF 6 22MM OEM SWIRL FLAP BLANKING PLATES I6 AUTOMOTIVE INC SEALS