Part No:
6011

Brand:
i6 AUTOMOTIVE

This EGR valve removal kit allows you to completely remove the EGR system from the engine.

The kit includes a 5mm thick blanking plates and high temp gasket to blank the exhaust manifold,

this eliminates the weak flexible EGR extension pipe that is prone to splitting.

Advantages of blocking EGR:
Turbo spools up quicker, and at lower revs (less turbo lag)
Prevents carbon build-up inside intake manifold, and ports
Smoother pick up from idle and better fuel economy
Cleaner engine oil helping to give longer engine life.
Lowers soot output (less smoke on pull off)



To fit the following Engine Codes (can be found on a sticker on the Cam Belt Cover or in the Boot):

APPLICATION:

For BMW engines M47 M47N M57 M47N2 M67 M47R
3 series E46
318d (2001-2005)
318td (2002-2004)
320d (1997- 2005)
320cd (2003- 2006)
320td (2000-2004)
330d (1998-2003)
330xd (2000-2003)

5 series E39
520d (1999-2003)
525d (1999-2003)
530d (1997-2003)

X5 E53
3.0d (2000-2003)


X3 E83
2.0d (2003-2006)



E38 7 Series
730d (1997-2001)
740d (1998-2001)

E65 7 Series
740d (2001-2005)


For Land Rover:
For Freelander TD4 (2001-2006)
For Land Rover TD6 (2002-2006)

This item is for diesel vehicles only NOT PETROL

No instructions included, Professional installation is highly recommended

PACKAGE:
1 x EGR pipe
2 x ties
2 x cooler blanks
2 x bolts
1 x gasket
1 x block plate

Installation Instructions:
1.Remove and lift off the engine cover.
2.Pull the vacuum hose off of the EGR valve.
3.Remove EGR Pipe From Exhaust Manifold.
4.Connect blanking caps on to each end of the cooler.(skip this step if your vehicle doesn't have an EGR cooler.)
5.Blank off the vacuum pipe.
6.Blank the hole on the exhaust manifold.
7.Connect the EGR delete tube to the intake manifold.
8.Start the vehicle and check for any leaks.